CAC IncorporatedSURCON RegulatedNIS MemberFIRS Tax Compliant

Precision geospatial data you can build on.

Land surveying, engineering surveys, drone mapping and GIS for developers, contractors, landowners and government. Every plan is checked against ground control and signed by a registered surveyor.

A typical project specification

Reference frame
WGS 84 / UTM 31N (EPSG:32631)
Local datum
Minna / UTM 31N (EPSG:26331)
Capture
RTK GNSS, total station and UAV photogrammetry
Outputs
Certified survey plan, DWG, orthomosaic, DTM
Steel portal frames of an aircraft hangar under construction, with cranes and a survey crew on site
Structural setting-out, aircraft MRO hangar, Ikeja
  • CAC IncorporatedRC 1846467, since 30 September 2021
  • SURCON RegulatedSurveyors Council of Nigeria, Reg. No. 5898
  • NIS MemberNigerian Institution of Surveyors, NIS/ASS/2736
  • FIRS Tax CompliantFederal Inland Revenue Service

Survey-grade data, from boundary to build.

One registered team handles the ground survey, the aerial capture and the analysis, so everything you receive sits in one coordinate system and carries one signature.

Aerial image overlaid with surveyed land parcels and boundary lines

Cadastral and boundary surveys

For landowners, developers, institutions and legal practitioners

Perimeter surveys with beacons at every corner and turning point, coordinated to a standard the state registry accepts. We prepare plans for Certificate of Occupancy, Governor's Consent and deed registration, re-establish lost boundaries and investigate encroachment.

You receive

  • Certified survey plan
  • Beacon coordinate schedule
  • Photographic beacon record
Total station set up on a tripod at a cleared site

Topographic and contour surveys

For architects, engineers and site planners

Spot heights, break lines and contours at the interval your design needs, down to 0.5 m. Captured by RTK GNSS, total station or drone depending on the site's size, canopy and access, and delivered as a surface your design team can open straight away.

You receive

  • Contoured plan (DWG, PDF)
  • Civil 3D surface / DTM
  • Coordinate listing (CSV)
Surveyors in high-visibility vests checking alignment beneath a steel hangar frame

Engineering survey and construction setting-out

For contractors on programme

Control networks, building grids, pile and column centrelines, bolt alignment and verticality checks, so the structure goes up where the drawing says. Available as staged call-off visits, a resident site surveyor, or an independent check of another contractor's work.

You receive

  • Adjusted control schedule
  • Setting-out records
  • As-built survey
Survey drone in flight above a GNSS receiver on a tripod

Drone mapping and photogrammetry

For large, remote or slow-to-walk sites

UAV flights planned around airspace permissions and tied to ground control. We process imagery into georeferenced orthomosaics, surface and terrain models, stockpile volumes and multispectral crop-health layers.

You receive

  • Orthomosaic (GeoTIFF)
  • DSM / DTM and contours
  • Point cloud (LAS / LAZ)
Concrete survey control pillar marked with its reference number

Route, corridor and mining cadastral surveys

For roads, pipelines, power lines and mineral titles

Centrelines, cross-sections and benchmark networks along linear routes, plus pipeline right-of-way mapping. For mineral titles we place and record beacons that match the coordinates lodged with the Mining Cadastre Office, so applications are not rejected for overlaps.

You receive

  • Long and cross-sections
  • Corridor strip maps
  • Title beacon schedule
Thematic GIS map of a settlement colour-coded by building year

GIS, remote sensing and CAD drafting

For planners, agencies and asset owners

Spatial databases, land-use and change analysis from satellite imagery, site suitability studies and web maps your team can query. Master layouts and road designs are drafted in Civil 3D with our retained COREN-registered engineers and TOPREC-registered planners.

You receive

  • GIS layers (SHP / GPKG)
  • Web map or dashboard
  • Spatial analysis report

Not sure which survey you need? Send the site location and what the result is for, and we will recommend the right scope.

Describe your site

From brief to usable data in four controlled stages.

Each stage closes before the next one opens. Nothing leaves the office until it has been checked against control.

  1. Stage 1

    Scope and control

    We confirm what the survey is for, the datum and the accuracy you need, then establish ground control on site.

  2. Stage 2

    Field capture

    GNSS, total station, levelling and UAV flights, planned around access, canopy, weather and airspace.

  3. Stage 3

    Process and check

    Network adjustment, processing and closure checks against independent control points.

  4. Stage 4

    Certify and deliver

    Plans and datasets in the formats your engineers and the registry use, signed by the Principal Surveyor.

Surveys behind real builds.

Field assignments delivered under contract to Nigerian construction, energy and survey firms. Client names are withheld; project sheets and references are available on request.

12+years of field practice
208 kmof road corridor surveyed
5states delivered in
4sectors served
Steel hangar frame rising on a construction site with mobile cranes
Aviation, Ikeja, Lagos2024 to date

Aircraft maintenance, repair and overhaul hangar

Topographic survey, primary site control and precision structural setting-out: column baseplate coordinates, bolt alignment and grid checks through steel erection.

Surveyor with a GNSS rover among column reinforcement at a terminal site
Infrastructure, Abuja FCT2022 to 2024

Three city bus terminals

Layout and multi-phase structural alignment across the Mabushi, Kugbo and Central Area terminals.

Road works with reinforcement laid out along a cleared corridor
Roads, Adamawa State2023

183 km Yola to Mubi road rehabilitation

Benchmark networks, centreline stake-out and Civil 3D cross-sections along the full corridor.

Surveyor on a riverbank at a bridge construction site
Roads and bridges, Bauchi State2019 to 2022

25 km Itas to Gadau road and bridges

All survey work on a new road across riverine terrain, including vertical grade design in Civil 3D.

3D render of an estate subdivision plan showing plots and roads
Cadastral, Akure, Ondo State2023 to 2024

45-hectare estate subdivision

Perimeter pillars, plot beacons and road reserves, with cadastral plans lodged for individual titles.

GNSS control point on farmland prepared for a drone survey
UAV and GIS, South-West2024

Commercial farmland drone survey

Sub-3 cm orthomosaics, surface models and drainage slope analysis for farm infrastructure planning.

Surv. Bayode Emmanuel Ozovehe, Principal Surveyor
Surv. Bayode Emmanuel OzovehePrincipal Surveyor and Managing Director

A registered surveyor signs every plan we release.

Pathways Mapping Nigeria Limited is an indigenous surveying and geospatial firm, incorporated in 2021 and based in Akure. We serve government agencies, construction firms, private organisations and individual landowners across Nigeria.

The firm is led by Surv. Bayode Emmanuel Ozovehe, registered with the Surveyors Council of Nigeria and a member of the Nigerian Institution of Surveyors. His twelve years in the field span aviation, road infrastructure, transport terminals, oil and gas support and institutional boundary work in five states. Under SURCON's code of conduct he carries personal accountability for every deliverable he certifies.

No survey plan or report leaves this office without the Principal Surveyor's review and signature.

SURCON registration
Surveyors Council of Nigeria, Reg. No. 5898
NIS membership
Nigerian Institution of Surveyors
MSc Surveying and Geo-informatics
Geodesy and Geodynamics, Abubakar Tafawa Balewa University, 2024
PGD Surveying and Geo-informatics
Federal University of Technology, Akure, 2018
HND and ND Surveying
Rufus Giwa Polytechnic, Owo, 2013 and 2010
Drone pilot certification
Aeroport College of Aviation, 2025

A plan you can file. A dataset you can build on.

Every project ships in open, industry-standard formats, so your CAD, GIS and registry workflows open the files without conversion.

  • DWG / DXFCAD-ready linework and survey plans
  • GeoTIFFOrthomosaics and elevation models
  • LAS / LAZClassified point clouds
  • SHP / GPKGGIS layers with attribute tables
  • CSVCoordinate and level listings
  • PDFSigned survey plans and technical reports
Illustrative five-beacon boundary plan with bearings, distances and an area of 15,680 square metres N 03°12′ E 90.1 m N 74°30′ E 93.4 m S 52°24′ E 82.0 m S 17°24′ W 83.8 m N 83°42′ W 135.8 m PB1 PB2 PB3 PB4 PB5 15,680 m² 1.568 ha N
Illustrative boundary plan, beacons PB1 to PB5Not to scale

Built for the people who build on, buy and plan land.

We mobilise from Akure to sites in any state.

  • Real estate and land titling

    Verified boundaries and registrable plans before you buy, subdivide or build.

  • Construction and infrastructure

    Topographic baselines, setting-out, progress capture and as-built records for roads, estates and structures.

  • Aviation and industrial facilities

    Tight-tolerance structural control for hangars, plants and heavy equipment foundations.

  • Agriculture and land use

    Farm boundaries, plot areas and aerial imagery for planning, leasing and crop monitoring.

  • Energy, mining and utilities

    Corridor surveys, mineral title beacons and asset mapping for lines, pipelines and installations.

  • Government and urban planning

    Base maps, land-use layers and settlement mapping that planning teams can keep updating.

Instructor teaching GIS to participants working on laptops

Registering interest for the first cohorts

Pathways GIS Institute

Practical geospatial training in Akure, taught by a practising registered surveyor on live project data. Every course includes instrument or lab time.

  • Drone mapping and photogrammetry 5 days
  • GIS fundamentals with QGIS and ArcGIS 5 days
  • GNSS, RTK and DGPS surveying 5 days
  • AutoCAD Civil 3D for surveyors 10 days
  • AI for geospatial analysis 10 days
View all 12 courses

Tell us about your site.

Send the location, the rough size and what the survey is for. You get back a written quotation with scope, method, accuracy, deliverables and timeline.

Office
140 Oyemekun Road, beside Sterling Bank, Akure 340110, Ondo State, Nigeria
Hours
Monday to Friday, 8:00 am to 5:00 pm. Field work by arrangement, weekends included.

Request a quote

Fields marked * are required. Your enquiry opens in WhatsApp or your email app, ready to send.